You are here: Home > Peripheral Devices > Fusion Brain
Sort By:
Page of 1
3-pin Female-Female Shielded Wire
3-pin Female-Female Shielded Wire
Our Price: $1.99

Has a 1x3 female header on both ends of the cables. Can be used for the current sensor, accelerometer, and other sensors as a replacement or otherwise. You could also chop it in half to get 2 bare wire to header connections which will plug directly into the Fusion Brain analogue ports.
3-pin Female-Bare Shielded Wire
3-pin Female-Bare Shielded Wire
Our Price: $1.99

Has a 1x3 header on 1 end and 2 insulated wires and shielding on the other end for a total of 3 wires. Perfect for making your own cables for your own sensors.
3-pin Female-Male Shielded Extension Wire
3-pin Female-Male Shielded Extension Wire
Our Price: $1.99

Extend analogue inputs 1 meter (3.5 feet).

These have a female header on one end, and a male header on the other end.
2-pin Female-Male Shielded Extension Wire
2-pin Female-Male Shielded Extension Wire
Our Price: $1.99

Extend digital outputs 1 meter (3.5 feet).

These have a female header on one end, and a male header on the other end.
Thermometer
Thermometer
Our Price: $7.99

The Fusion Thermometer can be used for many different applications, but the most obvious use is for completely autonomous HVAC control. With the free Fusion Control Centre software, you can configure your digital output with a Fusion Relay Pack to turn on and off with the climate. If the thermal sensor is placed inside the car, it can keep the cabin at a constant and comfortable temperature. Another option is to place the thermal sensor on the outside and monitor the difference in temperature to know when to turn on the defroster, or simply display the readings on the screen as an info only option.
Volume Control (Linear Potentiometer)
Volume Control (Linear Potentiometer)
Our Price: $9.99

The Linear Potentiometer with LED can be used for many reasons including volume control and feedback.

Includes 1m (3ft) cable.
Volume Control (Rotary Potentiometer)
Volume Control (Rotary Potentiometer)
Our Price: $9.99

The Rotary Potentiometer can be used for many reasons including volume control and feedback. It can only be turned 1 revolution. It does not spin forever, meaining with volume control it should be the only control source.

Includes 1m (3ft) cable.
Photosensor
Photosensor
Our Price: $14.99

The Fusion Photosensor measures ambient light conditions, and sends the information to the Fusion Brain. Can be used to control LCD brightness, though the Fusion software.

Includes 1m (3ft) cable.
4 Channel Input Isolator and Voltage Divider
4 Channel Input Isolator and Voltage Divider
Our Price: $17.99

This is a dual function board with 4 separate and independent channels to connect to your Fusion Brain. You can connect up to 4 voltage sources to each of these boards. First the onboard voltage divider will scale the voltage lower, then feed it through an isolator, and on the other end the Fusion Brain will read it as a 0v to 5v number. If for any reason something bad happens on the input side (such as a large voltage spike) the isolator channel will be damaged but your Fusion Brain will be protected.
The Fusion Frequency to Voltage Sensor
The Fusion Frequency to Voltage Sensor
Our Price: $17.99

The Fusion Frequency to Voltage Sensor converts a signal between 0Hz and 650Hz into a 0v to 4.5v output that the Fusion Brain can read from an analogue input.

Please note:  This is a hobbyist grade product.  As such, limited or no documentation is included with it and advanced technical skill may be required to use it.  Help may be available on the mp3Car forums or by contacting technical support at our store. However, as manufacturers of hobbyist grade products usually create them in their spare time, response time to technical questions can sometimes take extended periods of time.  By purchasing this product, you acknowledge these disclaimers.  
MOSFET Power Output Board
MOSFET Power Output Board
Our Price: $19.95

Control your devices through PWM with a Fusion Brain and this Output Board. This is an easy solution to speed control for simple DC motors. PWM can also be used to get an analogue output from the Fusion Brain through a simple RC filter.
50A Current Sensor
50A Current Sensor
Our Price: $19.99

This sensor can measure the current up to 50A on any line. Use it to measure how much power your computer really draws, or how efficient is that amp your paid hundreds for? Find out with the new Fusion Current Sensor. Installation is simple, and as always connects to the Fusion Brain with only 1 connection.
Infrared Distance Sensor
Infrared Distance Sensor
Our Price: $24.99

The Fusion IR Distance Sensor is a based on a Sharp Microelectronics IR Distance Measuring Sensor, and is capable of measuring 20-150cm. It is best for measuring distances to precise spots, rather than general areas.
3-Axis Accelerometer
3-Axis Accelerometer
Our Price: $29.99

Monitor and record the G-forces that you experience while driving easily and accurately. The Fusion Accelerometer is accurate up to +/- 6G's. A typical Forumula1 race car accelerates at 1.7G's, and a typical car is between 0.3G and 0.5G. The Fusion Accelerometer insures you get the most accurate reading possible.
Ultrasonic Distance Sensor
Ultrasonic Distance Sensor
Our Price: $34.99

The Ultrasonic distance sensor consists of a ultrasonic transducer mounted on a small PCB, with mounting holes. It can detect objects 0-in. to 254-in. (6.45-meters), and range objects 6-in. to 254-in. (6.45 meters). Ultrasonic sensors are more of a shotgun distance sensor, as opposed to the 'laser beam' IR distance sensor. Use the IR distance sensor for targeted distance measurement, and the ultrasonic distance sensor for wide-range applications. Car based applications include, backup sensors, parking sensors, curb sensors, and more. Home automation applications include room monitoring, garage parking sensors, and more.


10pack of 25A Relays
10pack of 25A Relays
Our Price: $39.99

Fusion's official relay packs offer the easiest solution to controlling your car's systems. The relays feature easy connect spade adapters with a maximum allowed current of 25A. With the easy connect terminals with the standard Fusion header connector on the other end, this truly is a plug-n-play solution for the Fusion Brain.
Fusion Brain Version 6
Fusion Brain Version 6
Our Price: $69.95

31 Digital Outputs: Each output can sink 500mA, and has a status LED to show state

15 Analogue Inputs: Each input is now a 3.3v 10bit sensor port. Giving accuracy of 0.0032v accuracy versus the current 0.0049v accuracy.

32bit Processor running at 80MHz (80 Million Instructions Per Second/MIPS): This is a brand new cream of the crop microcontroller. Internal CPU speed has increased by 500%. The current microcontroller's base was designed in 1975 whereas this new one was designed in 2007. It uses less power, is more accurate, is faster, and is jus plain awesome.