http://www.mp3car.com

• Features	D201GLY2	CHANGE	D201GLY2A
  MP3car part number	MTB-053		MTB-054
  Board series	Essential		Essential
  BIOS ID string	LY66210M.86A		LY66210M.86A
  AA# (Altered Assembly)	E14305-XXX		E26311-XXX
  Processor	Intel® Celeron® 220 processor		Intel Celeron 220 processor
  Performance (04B/05B)/mainstream (04A/05A) vreg support	None		None
  FSB support	533 MHz		533 MHz
  Processor socket	BGA		BGA
  Thermal Solution	Passive (fanless)	YES	Active (with fan)
  Chipset	SiS662*		SiS662
  Integrated graphics	Yes		Yes
  Form factor	uATX compatible		uATX compatible
  Memory - maximum supported	1 GB		1 GB
  Memory frequency	533 MHz		533 MHz
  Audio	AC'97 2 channel		AC'97 2 channel
  S/PDIF	None		None
  TV-out	None		None
  LAN controller	10/100 LAN		10/100 LAN
  USB connectors	6 USB (4-F, 2-B)		6 USB (4-F, 2-B)
  PCI slots	1		1
  PCI Express x16	None		None
  PCI Express x1	None		None
  SATA (ports)	2 (1.5 GB/s)		2 (1.5 GB/s)
  PATA (ports)	1		1
  IEEE-1394a ports	None		None
  TPM	None		None
  Intel® Matrix Storage Technology (RAID)	None		None
  Hyper-Threading Technology support	None		None
  Instantly Available PC	None		None
  Supports Intel® Viiv™ Technology	None		None
  3 year limited Intel warranty	Yes		Yes

• Processor Support • Intel® Celeron® Processor integrated Chipset • SiS* SIS662 North Bridge • SiS* SIS964 South Bridge I/O Features • Integrated super I/O LPC bus controller • Ultra ATA 100/66 device support • Two SATA ports (1.5 Gb/s) • One PCI local bus slot USB 2.0 • Two back-panel ports • Two onboard headers providing four ports support Audio Solution • AC’97 compliant integrated audio solution 10/100 Network Connection • Onboard 10/100 Ethernet LAN SPI System BIOS • 4 Mb Flash EEPROM with Intel® Tiano BIOS featuring Plug and Play, IDE drive auto-configure • Advanced configuration and power interface V1.0b, DMI 2.0 Intel® Rapid BIOS Boot • Optimized POST for fast access to PC from power-on System Memory Memory Capacity • One 240-pin DIMM connector • Designed to support up to 1 GB of system memory using DDR2 533 / 400 SDRAM Memory Type • DDR2 533 / 400 SDRAM Memory Voltage • 1.8 V Wake-up from Network • Wired for Management (WfM) 2.0-compatible • Support for system wake-up using an add-in network interface card with remote wake-up Capability Expansion Capabilities • One PCI bus add-in card connector Jumpers and Front-Panel Connectors Jumpers • Single configuration jumper design • Jumper access for BIOS configuration mode Front-Panel Connectors • Reset, HD LED, Power LEDs, power on/off, aux LED • Two USB 2.0 headers • Audio header Mechanical Board Style • Mini-ITX/microATX compatible • 6.75” x 6.75” (17.145 cm x 17.145 cm) Desktop Board Power Requirements • ATX12V or SFX12V Environment Operating Temperature • 0° C to +55° C Storage Temperature • -40° C to +70° C Regulations and Safety Standards United States and Canada CSA/UL 60950-1, First Edition (Binational Standard) Europe (Low Voltage Directive 2006/95/EC) EN 60950-1:2006 International IEC 60950-1:2001, First Edition EMC Regulations (tested in representative chassis) United States FCC 47 CFR Part 15, Subpart B Canada ICES-003 Class B Europe (EMC Directive 2004/108/EC) EN 55022:2006 and EN 55024:1998 Australia/New Zealand EN 55022:2006 Class B Japan VCCI V-3/04.04, V-4/03.04, Class B South Korea KN-22:2005 and KN-24:2005 Taiwan CNS 13438:2006 Class B International CISPR 22:2005 +A1:2005 +A2:2006 Class B

• 
  
  

  Product Guide	Download PDF (3.5 MB)
  Product Brief	Download PDF (990 KB)

Additional Product Information:

Drivers, Manual, Utilities, BIOS

Product Brief


PLEASE NOTE:

Mp3Car will not provide tech support in regards to use and set-up of this product.  Customers are expected to use the Mp3Car forums for assistance in these areas.  Registration on the forums is easy and free.