The M3-ATX is an intelligent vehicle (car / boat / electric cart) DC-DC ATX PC power supply designed for car pc or battery powered applications. Designed to provide power and to control the ON/OFF switch of a motherboard (car PC) based on ignition status, M3-ATX is a wide input (6 to 34V) vehicle / car / battery operated ATX power supply capable of surviving tough car engine cranks (down to 6V) as well as transient over-voltage situations. Just connect it to your car / boat / RV / solar battery and power up your PC!
M3-ATX-HV Characteristics
Minimum Input Operating. voltage 6V
Maximum input Operating voltage 34V (clamping will occur at 33-35V)
Deep-Discharge shutdown threshold 11.2V
Input current limit (fuse protected) 15A
Max Output Power 95 Watts (8-16V, see chart below)
Deep Sleep Current Consumption. 0.55mA @ 8V, 0.8mA @ 24V, 0.86mA @ 32V
Storage and operating temperature -55 to +125 degrees Celsius (storage), -40 – 65C (operating)
MTBF 150,000 hrs @ 50C, 96,000 hrs @65C
Efficiency (Input 9-16V) >94%, all rails combined, 50% load, V(in)=16V
Input connectors Fasten 0.25” terminal
Output Connector ATX Power 20 pin (Molex P/N 39-01-2200)
*Units starts failing at >125 Celsius. Operating at temperatures above 85C / 185F will drastically reduce
the MTBF.
Additional product information:
Please note:
Mp3Car will not provide tech support in regards to use and set-up of this product. Customers are expected to use the Mp3Car forums for assistance in these areas. A good place to start is the Mp3Car Power Supply sub-forum. Registration on the forums is easy and free.
|
