|
|
|
|
|
|
Arduino MEGA ADK R3 for Android
|
|
Our Price: $64.95
|
|
|
The Arduino ADK is a microcontroller board based on the ATmega2560 (datasheet). It has a USB host interface to connect with Android based phones, based on the MAX3421e IC. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
|
|
|
|
|
|
|
|
|
|
Genuine Arduino Starter Kit
|
|
Our Price: $119.95
|
|
|
This kit walks you through the basics in a hands-on way, with creative projects you build by learning, thanks
to a selection of the most common and useful electronic components with a selection of 15 projects that start
from a low complexity, in order to let you learn the basic of electronic, to a major one, using components that
let you control the physical world throw different kind of sensor.
|
|
|
|
|
|
|
|
|
|
Arduino Due
|
|
Our Price: $64.95
Sale Price: $54.95
|
|
|
The Arduino Due is the newcomer microcontroller board in the Arduino boards family. It's the first board based on a 32 bit ARM core processor, the Atmel SAM3X8E ARM Cortex-M3 MCU, that improve all the standard Arduino functionalities and add more new features.
|
|
|
|
|
|
|
|
|
|
Arduino Leonardo
|
|
Our Price: $21.95
|
|
|
The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
|
|
|
|
|
|
|
|
|
|
Arduino Proto Shield R3 (assembled)
|
|
Our Price: $18.95
Sale Price: $12.95
|
|
|
The Arduino Prototyping Shield makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard (not included) to quickly test circuit ideas without having to solder. It's got extra connections for all of the Arduino I/O pins, and it's got space to mount through-hole and surface mount integrated circuits. It's a convenient way to make your custom circuit and Arduino into a single module.
|
|
|
|
|
|
|
|
|
|
Arduino Proto Shield R3 KIT (unassembled)
|
|
Our Price: $12.95
|
|
|
The Arduino Prototyping Shield makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard (not included) to quickly test circuit ideas without having to solder. It's got extra connections for all of the Arduino I/O pins, and it's got space to mount through-hole and surface mount integrated circuits. It's a convenient way to make your custom circuit and Arduino into a single module.
|
|
|
|
|
|
|
|
|
|
Arduino Ethernet Shield R3
|
|
Our Price: $49.95
Sale Price: $44.95
|
|
|
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip (datasheet). The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections.
|
|
|
|
|
|
|
|
|
|
Arduino USB Serial Light Adapter
|
|
Our Price: $14.99
|
|
|
This board converts a USB connection into a 5 volt Serial TX and RX that you can connect straight to the Arduino Mini, Arduino Ethernet or other microcontrollers, allowing them to talk to the computer. It features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The '8U2 firmware uses the standard USB COM drivers, and no external driver is needed. However, on Windows, a .inf file is required.
|
|
|
|
|
|
|
|
|
|
Arduino Motor Shield R3
|
|
Our Price: $33.95
|
|
|
The Arduino Motor Shield is based on the L298 (datasheet), which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one independently. You can also measure the motor current absorption of each motor, among other features. The shield is TinkerKit compatible, which means you can quickly create projects by plugging TinkerKit modules to the board.
|
|
|
|
|
|
|
|
|
|
Arduino MEGA 2560 R3
|
|
Our Price: $59.95
|
|
|
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
|
|
|
|
|
|
|
|
|
|
Arduino Mini Light
|
|
Our Price: $29.95
Sale Price: $18.95
|
|
|
Arduino Micro Miniaturized version of Arduino boards (w/o USB part) without downside connector Minimal dimensions (30x18mm) allow space saving. It use an ATMEGA328 and it is usable with USB/Serial converter for programming and for add the USB port.
|
|
|
|
|
|
|
|
|
|
Genuine Arduino Uno R3
|
|
Our Price: $29.99
Sale Price: $20.95
|
|
|
The Arduino Uno R3 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz
crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
|
|
|
|
|
|
|
|
|
|
Arduino Wireless SD Shield
|
|
Our Price: $44.95
Sale Price: $24.95
|
|
|
The Wireless SD shield allows an Arduino board to communicate wirelessly using a wireless module. It is based on theXbee modules from Digi, but can use any module with the same footprint. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options. The shields breaks out each of the Xbee's pins to a through-hole solder pad.
|
|
|
|
|
|
|
|
|
|
Fusion Brain Version 6
|
|
Our Price: $69.95
|
|
|
31 Digital Outputs: Each output can sink 500mA, and has a status LED to show state
15 Analogue Inputs: Each input is now a 3.3v 10bit sensor port. Giving
accuracy of 0.0032v accuracy versus the current 0.0049v accuracy.
32bit Processor running at 80MHz (80 Million Instructions Per
Second/MIPS): This is a brand new cream of the crop microcontroller.
Internal CPU speed has increased by 500%. The current microcontroller's
base was designed in 1975 whereas this new one was designed in 2007. It
uses less power, is more accurate, is faster, and is jus plain awesome.
|
|
|
|
|
|
|
|
|
|
Arduino Mega 2560
|
|
Our Price: $59.90
|
|
|
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
|
|
|
|
|
|
|
|
|
|
Box for Arduino
|
|
Our Price: $13.95
Sale Price: $10.14
|
|
|
Box for Arduino: Plastic (flame retardant) box that could fit an Arduino board (Duemilanove-Diecimila-NG or MEGA), and Ethernet Shield and a battery. Made in ABS [...] plastic. Color Dark Gray (Picture shows transparency to demonstrate how the Arduino board fits inside the box) Dimensions 87x64x28mm All the internal parts (Boards and battery) are not included.
|
|
|
|
|
|
|
|
|
|
Arduino Ethernet Shield
|
|
Our Price: $39.90
|
|
|
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.
ethernet chip. The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the
|
|
|
|
|
|
|
|
|
|
Arduino Motor Shield PCB
|
|
Our Price: $13.99
Sale Price: $9.49
|
|
|
It allows to Arduino boards to drive 2 12V DC motors.
Includes only the PCB board.
|
|
|
|
|
|
|
|
|
|
Arduino Mini Microcontroller Module
|
|
Our Price: $27.99
|
|
|
The Arduino Mini is a small microcontroller board based on the ATmega168 (datasheet), intended for use on breadboards and when space is at a premium. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, and a 16 MHz crystal oscillator. It can be programmed with the Mini USB adapter or other USB or RS232 to TTL serial adapter.
|
|
|
|
|
|
|
|
|
|
Arduino Mini USB Adapter
|
|
Our Price: $19.99
|
|
|
This board converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Mini or other microcontrollers, allowing them to talk to the computer. It is based on the FT232RL chip from FTDI (drivers are included with the Arduino software).
|
|
|
|
|
|
|
|
|
|
Arduino Xbee Shield
|
|
Our Price: $44.95
|
|
|
The Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on the Xbee module from MaxStream. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options. The shields breaks out each of the Xbee's pins to a through-hole solder pad. It also provides female pin headers for use of digital pins 2 to 7 and the analog inputs, which are covered by the shield (digital pins 8 to 13 are not obstructed by the shield, so you can use the headers on the board itself).
|
|
|
|
|
|
|
|
|
|
MOSFET Power Output Board
|
|
Our Price: $19.95
|
|
|
Control your devices through PWM with a Fusion Brain and this Output Board. This is an easy solution to speed control for simple DC motors. PWM can also be used to get an analogue output from the Fusion Brain through a simple RC filter.
|
|
|
|
|
|
|
|
|
|
The Fusion Frequency to Voltage Sensor
|
|
Our Price: $19.95
|
|
|
The Fusion Frequency to Voltage Sensor converts a signal between 0Hz and 650Hz into a 0v to 4.5v output that the Fusion Brain can read from an analogue input.
Please note: This is a hobbyist grade product. As such, limited or no documentation is included with it and advanced technical skill may be required to use it. Help may be available on the mp3Car forums or by contacting technical support at our store. However, as manufacturers of hobbyist grade products usually create them in their spare time, response time to technical questions can sometimes take extended periods of time. By purchasing this product, you acknowledge these disclaimers.
|
|
|
|
|
|
|
|
|
|
3-Axis Accelerometer
|
|
Our Price: $29.99
|
|
|
Monitor and record the G-forces that you experience while driving
easily and accurately. The Fusion Accelerometer is accurate up to +/-
6G's. A typical Forumula1 race car accelerates at 1.7G's, and a typical
car is between 0.3G and 0.5G. The Fusion Accelerometer insures you get
the most accurate reading possible.
|
|
|
|
|
|
|
|
|
|
50A Current Sensor
|
|
Our Price: $19.99
|
|
|
This sensor can measure the current up to 50A on any line. Use it to
measure how much power your computer really draws, or how efficient is
that amp your paid hundreds for? Find out with the new Fusion Current
Sensor.
Installation is simple, and as always connects to the Fusion Brain with
only 1 connection.
|
|
|
|
|
|
|
|
|
|
Photosensor
|
|
Our Price: $14.99
|
|
|
The Fusion Photosensor measures ambient light conditions, and sends the
information to the Fusion Brain. Can be used to control LCD brightness,
though the Fusion software.
Includes 1m (3ft) cable.
|
|
|
|
|
|
|
|
|
|
Thermometer
|
|
Our Price: $7.99
|
|
|
The Fusion Thermometer can be used for many different applications, but
the most obvious use is for completely autonomous HVAC control. With
the free Fusion Control Centre software, you can configure your digital
output with a Fusion Relay Pack to turn on and off with the climate. If
the thermal sensor is placed inside the car, it can keep the cabin at a
constant and comfortable temperature. Another option is to place the
thermal sensor on the outside and monitor the difference in temperature
to know when to turn on the defroster, or simply display the readings
on the screen as an info only option.
|
|
|
|
|
|
|
|
|
|
Ultrasonic Distance Sensor
|
|
Our Price: $29.95
|
|
|
The Ultrasonic distance sensor consists of a ultrasonic transducer
mounted on a small PCB, with mounting holes. It can detect objects
0-in. to 254-in. (6.45-meters), and range objects 6-in. to 254-in.
(6.45 meters).
Ultrasonic sensors are more of a shotgun distance sensor, as opposed to
the 'laser beam' IR distance sensor. Use the IR distance sensor for
targeted distance measurement, and the ultrasonic distance sensor for
wide-range applications. Car based applications include, backup
sensors, parking sensors, curb sensors, and more. Home automation
applications include room monitoring, garage parking sensors, and more.
|
|
|
|
|
|
|
|
|
|
Volume Control (Linear Potentiometer)
|
|
Our Price: $9.99
|
|
|
The Linear Potentiometer with LED can be used for many reasons including volume control and feedback.
Includes 1m (3ft) cable.
|
|
|
|
|
|
|
|
|
|
Volume Control (Rotary Potentiometer)
|
|
Our Price: $9.99
|
|
|
The Rotary Potentiometer can be used for many reasons including volume
control and feedback. It can only be turned 1 revolution. It does not
spin forever, meaining with volume control it should be the only
control source.
Includes 1m (3ft) cable.
|
|
|
|
|
|
|
|
|
|
3-pin Female-Bare Shielded Wire
|
|
Our Price: $1.99
|
|
|
Has a 1x3 header on 1 end and 2 insulated wires and shielding on the
other end for a total of 3 wires. Perfect for making your own cables
for your own sensors.
|
|
|
|
|
|
|
|
|
|
3-pin Female-Male Shielded Extension Wire
|
|
Our Price: $1.99
|
|
|
Extend analogue inputs 1 meter (3.5 feet).
These have a female header on one end, and a male header on the other end.
|
|
|
|
|
|
|
|
|
|
10pack of 25A Relays
|
|
Our Price: $39.99
|
|
|
Fusion's official relay packs offer the easiest solution to controlling
your car's systems. The relays feature easy connect spade adapters with
a maximum allowed current of 25A. With the easy connect terminals with
the standard Fusion header connector on the other end, this truly is a
plug-n-play solution for the Fusion Brain.
|
|
|
|
|
|
|
|
|
|
4 Channel Input Isolator and Voltage Divider
|
|
Our Price: $19.95
|
|
|
This is a dual function board with 4 separate and independent channels
to connect to your Fusion Brain. You can connect up to 4 voltage
sources to each of these boards. First the onboard voltage divider will
scale the voltage lower, then feed it through an isolator, and on the
other end the Fusion Brain will read it as a 0v to 5v number. If for
any reason something bad happens on the input side (such as a large
voltage spike) the isolator channel will be damaged but your Fusion
Brain will be protected.
|
|
|
|
|
|
|
|
|
|
ATmega328 with Arduino Bootloader
|
|
Our Price: $9.95
|
|
|
ATmega328 with Arduino Bootloader
|
|
|
|
