|
MKIV Volkswagen 7” Bezel
Technical Specifications
H 4.5” x W 7.5”
Screen Opening H
3.1/8” x W 6.3/32”
Maximum panel width
6.75”
Installation:
Grab your Screwdriver
- Remove Screen from case, and keep mounting
screws and tabs.
- Screw Screen tabs into the four corner
mounts on the bezel but don’t fully tighten the tabs.
- Place Screen onto bezel and spin metal tabs
over and panel then tighten screws. NOTE: Do not over tighten screws as
you may strip screw holes.
- Go to your car and remove your stock radio
if you have not already done so. (You can get radio keys from
42draftdesigns.com or get ripped of at any VW dealer)
- Place the left side of the screen in at an
angle as shown below.
- Then gently press the right side into the
dash and the bezel will snap in.
- Congratulations you have installed your MKIV
Bezel, Go drive around and play with your Car PC but watch the road!
To remove the bezel:
1.
Grab a
credit card or other flat object that won’t damage your dash.
2.
Stick it in
the right side and carefully pry the bezel out, this wont take much force so
take it easy. 
|
Looks great 
