 |
 |
 |
 |
| Input |
12V |
24V
|
| Normal input voltage: |
6.5V to 30V DC, 36V Peak |
6.5V to 30V DC, 36V Peak |
| Low battery shutdown voltage: |
8.5V, 9.5V, 10.5V or 11V ± 0.25V (set by Jumper) |
17V, 19V, 21V or 22V ± 0.5V (set by Jumper) |
| Battery good detection voltage: |
+1V to +2V |
+2V to +4V |
| Low battery detection duration: |
10 sec. |
10 sec. |
| Output: |
120W |
Ripple |
Regulation |
| +3.3V: |
8A Max, 10A Peak |
50mv p-p max |
2% |
| +5V: |
8A Max, 10A Peak |
50mv p-p max |
2% |
| +12V: |
3.5A Max, 4.5A Peak |
100mv p-p max |
2% |
| -12V: |
0.35A Max, 0.5A Peak |
150mv p-p max |
10% |
| +5V STDBY: |
2A Max, 2.5A Peak |
50mv p-p max |
2% |
| Power supply overall efficiency |
>90% |
| General |
| Shutdown delay time: |
10 sec., 10, 30 or 60 min. (set by jumper) |
| Wake on interrupt operation time: |
20 min. (while power-On lead is OFF) |
| Power-ON input current |
<5 mA |
| Remote/trigger output source current: |
0.30A max. (Switched Battery) |
| MTBF: |
TBD |
| Operating temperature range: |
-20C to 60C |
| Input fuse: |
15A mini blade (Automotive mini blade fuse) |
Output power connectors:
|
20 pin ATX MB power cable 200mm long with 2 HDD and 2 FDD power cables 240mm long, 2 pin ATX power switch cable 270mm |
| External Dimensions and Weight: |
|
DC-DC PCB Module
|
180mm x 77mm x 19mm 7.1" x 3.1" x 0.75" 136g / 0.3 LBS | |
|
 |
 |
 |
 |
|
 |

|