http://www.mp3car.com

• ATX cable extender plus HDD and Floppy power (9inch)
• Power input cable harness terminated in 0.25' fastons (12inch, AWG18)
• 2 pin M/B on/off power ON control wire harness (9inch)
• set of LBJ (little black jumpers) to control various power sequencing schemes

Just connect it to your 12V or 24V car / boat / RV battery and power up your PC!

M1-ATX has 8 user selectable microcontroller driven timing modes, allowing you to choose up to 8 ignition/shutdown vehicle / car pc timing schemes via a built-in shutdown controller. By removing all user-selectable jumpers, M1-ATX becomes a traditional PC PSU with no ignition control (shutdown controller bypassed) and it can be used in non-vehicle computer applications.

Even if your computer is totally OFF, a PC will still consume a few hundred milliwatts, needed to monitor PC ON/OFF status. When the computer (car pc) is in the suspend/sleep mode, it will consume even more power, because the RAM needs to be powered at all times. The power consumption in the suspend mode is few watts.

No matter how big your car battery is, it will eventually drain your vehicle / car battery in a matter of days.

While in deep sleep mode, M1-ATX constantly monitors your car battery voltage levels, preventing deep discharge situations by automatically shutting down (using a built-in shutdown controller) until battery levels reach safe levels again.

No more dead car batteries, no more computer resets during engine cranks, along with multiple timing schemes, small formfactor and very competitive price makes the M1-ATX the premier solution for dc-dc ATX vehicle / car PC power supply solutions.

The M1-ATX form factor is compatible with all Casetronics enclosures.

NOTE: Do not try use this PSU with Pentium 4s! It works with all VIA mini-ITX boards and some low power Pentium's and AMD's, please check your motherboards specs and make sure that the CPU is not getting V(core) from the 12V rail, must be from the 5v rail. Stay away from motherboards that have 4 pin 12VATX connectors, that that is a good indication that the M/B is using 12V for V(core).

Reviews:

EPIA center reviews the M1-ATX
Mp3Car.com user reviews

Need more power?

If you need more than 90 watts check out the M2-ATX with 160 watts of output.

• 6-24V wide input range
• Intelligent shutdown controller
• ON/OFF motherboard control
• Survives vehicle engine cranks
• Battery deep discharge prevention
• High efficiency, 90 watts output
• Works with 12V / 24V car batteries
• "Anti-Thump" Amplifier remote control
• Automotive fuse (mini-blade)
• Comes with complete wiring harness
• Works with all VIA Mini ITX Motherboards