|
|
|
|
|
|
CarNetix CNX-CA-XSC4
|
Our Price: $24.99
|
|
|
This power cable kit provides a "plug-and-play" cabling solution for either the P1900 or P2140 and a Xenarc MP-SC3. No soldering is required. The kit includes both the power cable and ACPI cable for the Xenarc MP-SC3 with rear-panel access to the PC power button. Double check your PC to make sure it has this ACPI interface.
|
|
|
|
|
|
|
|
|
|
|
|
|
CarNetix CNX-XSC8 Cable Kit for the Xenarc MP-SC8 Power
|
|
Our Price: $14.95
|
|
|
This power cable kit provides a "plug-and-play" cabling solution for either the P1290 and a Xenarc MP-SC8. No soldering is required. The kit includes both the power cable (4-pin Kycon connector) and ACPI cable (1/8" stereo plug) for the Xenarc MP-SC8 with rear-panel access to the PC power button. Double check your PC to make sure it has this ACPI interface.
For bulk pricing contact store@mp3car.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
CarNetix CNX-PJ-Kit Programming kit
|
|
Our Price: $14.99
|
|
|
Primary output voltage programming jumper kit for the P2140. It will allow you to change the primary output to +13V, +14V, +15V, +16V or +17V.
|
|
|
|
|
|
|
|
|
|
|
|
|
Y Cable Only from the Mac Mini Power Button Cable Kit
|
|
Our Price: $7.00
|
|
|
We have designed a Y-cable for the Mac mini that allow you to keep your existing power button intact! The Y-cable goes in between your existing power button cable/connector and the motherboard. The other end of the Y-cable extends out of the Mac mini chassis and connects to the "power button extension cable" which connects to J2 on the P1900. This gives you a way to quickly/easily disconnect your Mac if you want to remove it from your car and take it inside!
This cable does not work on mac minis that were made after march of 2009. A cable for the 2009 mac minis is in the works, but we can not commit to a date until it goes into production.
View a PDF of how to install this product here.
|
|
|
|
|
|
|
|
|
|
|
|
|
Aopen MiniPC plug-and play Power Button Cable Kit for P1900
|
|
Our Price: $14.99
|
|
|
This kit is designed to provide a plug-and-play (ie no soldering) connection to the AOpen power button which can be extended outside of the AOpen chassis and connected to the ACPI output of the P1900. This cable will simplify, and make more reliable the AOpen/P1900 installation.
The cable kit contains two pieces. One piece is inserted between the front panel switch pcb cable and the motherboard. The second piece provides a removable cable section for connecting to the P1900 ACPI output. This allows you to easily remove the AOpen from the car so that you can take it indoors for software updates.
This cable is about 12" long. It can be extended for people who would like more separation between their Aopen and their Carnetix.
|
|
|
|
|
|
|
|
|
|
|
|
|
MacPac Power Cable Kit
|
|
Our Price: $29.99
|
|
|
A "plug and play" power cable kit for your Mac mini! No more cable splicing!!
Carnetix is pleased to announce the only "plug-and-play" power cable solution for the Apple Mac mini and your CarComputer application! The "MacPac" power cable kit connects your mini to the CNX-CA-P1900 or CNX-P2140 DC-DC regulator to provide a quick and simple automotive installation. You are no longer required to cut and splice your Apple AC adapter (brick). The MacPac provides a pre-wired cable between the regulator (P1900 or P2140) and the Mac mini, and includes all power and control signals necessary for full automatic startup and shutdown of the mini. The MacPac is fully compatible with the original Mac mini as well as the new Intel-based mini.
The main white power cable is ~3' from the mac mini power connector. This means your mac mini can be about ~3' from your Carnetix device. Custom cable extensions should be possible to create but will void your warranty.
The power switch portion of this cable kit does not work on mac minis that were made after march of
2009. A cable for the 2009 mac minis is in the works, but we can not commit to a date until it goes into production. Until the new switch cable is made, you can still use this cable to power your mac, it will just not be timed to start up and shut down with your engine ignition status.
NOTE: The Power Button cable included in this kit does NOT work with the New Mac Minis (Apple Part No. MB463LL/A). However the main power cable is still compatible. A new Power-button assembly is expected in November.
|
|
|
|
|
|
|
|
|
|
|
|
|
CNX Extra Monitor Power Cable
|
|
Our Price: $4.99
|
|
|
The optional LCD monitor power cable let's you power your CarPC display from the CNX-P1900 and P2140 PSU +12 volt output. Just splice this cable in parallel with your CarPC power cable so that the CNX-P1900 or P2140 powers both units. The connector fits the Lilliput and Xenarc monitors or any other monitor with a 2.1 x 5.5mm power connector.
|
|
|
|
|
|
|
|
|
|
|
|
|
Sumicomm/Xenarc/Commell/IWill Case Power Cable
|
|
Our Price: $6.95
|
|
|
The optional LCD monitor power cable let's you power your CarPC display from the CNX-P1260 PSU +12 volt output. Just splice this cable in parallel with your CarPC power cable so that the CNX-P1260 powers both units. The connector fits the Lilliput and Xenarc monitors or any other monitor with a 2.1 x 5.5mm power connector.
** IWill ZPC Users Please Note: check your power pins for the proper polarity and pin-outs before using this cable. IWill products have a variation of power pin configurations. Double check before using.***
|
|
|
|
|
|
|
|
|
|
|
|
|
CarNetix CNX-P1900 Ver. 2.2 Dual Output 140 Watt 12V DC-DC Regulator
|
|
Our Price: $99.95
|
|
|
The CNX-P1900 provides two outputs. The primary output is jumper selectable for 18V, 19V, or 20V operation and can provide up to 6.32 amps (125 Watts @ 20V ). The secondary output is jumper selectable to provide either +12V to power your LCD screen (or 13.5V or experimental purposes), or +5V to power USB devices (such as the Audigy 2NX sound USB sound card) with up to 3 amps (15 Watts). The P1900 can accept battery input as low as 7 volts under full load (140 watts) during cranking while providing a well-regulated output to ensure the stability of your CarPC.
|
|
|
|
|
|
|
|
|
|
|
|
|
Carnetix CNX-P5V 15 Watt +5V Regulator
|
|
Our Price: $24.95
|
|
|
Upgrade your P1900 to include a 3RD regulated (+5V) output OR it can also be used as a stand-alone +5V/15 Watt Point Of Load (POL) supply
|
|
|
|
|
|
|
|
|
|
|
|
|
Mac Mini Power Button Cable Kit
|
|
Our Price: $10.00
|
|
|
We have designed a Y-cable and extension cable for the Mac mini that allow you to keep your existing power button intact! The Y-cable goes in between your existing power button cable/connector and the motherboard. The other end of the Y-cable extends out of the Mac mini chassis and connects to the "power button extension cable" which connects to J2 on the P1900. This gives you a way to quickly/easily disconnect your Mac if you want to remove it from your car and take it inside!
This cable does not work on mac minis that were made after march of
2009. A cable for the 2009 mac minis is in the works, but we can not commit to a date until it goes into production.
View a PDF of how to install this product here.
|
|
|
|
|
|
|
|
|
|
|
|
|
Aopen Power Pac
|
|
Our Price: $24.95
|
|
|
Worried about cutting up your Aopen Pandora Mini-PC power brick to complete your car-pc install? No need. The Aopen Power Cable kit is the first plug-and-play power kit designed to work with the Aopen Pandora Mini-PCs and Carnetix DC-DC regulators (P1900 and P2140).
The kit comes with the power wiring kit as well as the power-button kit. The power wiring kit plugs into a Carnetix P1900 or P2140 regulator and it plugs directly to the power connection on the back of the Pandora Mini-PC giving you a quick way to install the PC in your car. The Power-button kit on the other hand allows you to retain the functionality of the power button on the Aopen case while allowing the Carnetix DC-DC regulator turn the PC on/off with the ignition.
The Aopen Power Cable kit gives you the portability that Mac Mini users have enjoyed for a while. With this kit you won't need to cut your stock power brick, therefore you can port your PC between your house and your car without any wiring hassles.
|
|
|
|
|
|
|
|
|
|
|
|
|
CarNetix CNX-P2140 185W Dual Output Intelligent DC-DC Regulator
|
|
Our Price: $135.00
|
|
|
The most powerful and intelligent regulator
ever built!
|
|
|
|
|
|
|
|
|
|
|
|
|
CarNetix CNX-XSC3 Cable Kit for the Xenarc MP-SC3 Power
|
|
Our Price: $14.95
|
|
|
This power cable kit provides a "plug-and-play" cabling solution for either the P1290 and a Xenarc MP-SC3. No soldering is required. The kit includes both the power cable and ACPI cable for the Xenarc MP-SC3 with rear-panel access to the PC power button. Double check your PC to make sure it has this ACPI interface.
For bulk pricing contact store@mp3car.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CNX-P1900 and CNX-P2140 Input/Output Replacement cables
|
|
Our Price: $15.00
|
|
|
This cable pack is a direct replacement for the stock 6-pin input cable harness and the stock 8-pin output cable harness for the CarNextix P1900 and P2140 regulators.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CarNetix CNX-P1290 Spare Cable Set
|
|
Our Price: $7.00
|
|
|
This cable pack is a direct replacement for the stock 4-pin input cable harness (J1) and the stock 6-pin output cable harness (J2) for the CarNetix P1290 regulator.
|
|
|
|
|
|
|
|
|
|
|
|
|
Mac Mini Power Button Cable Kit w/ Momentary Pushbutton
|
|
Our Price: $13.99
|
|
|
We have designed a Y-cable and extension cable for the Mac mini that allow you to keep your existing power button intact! The Y-cable goes in between your existing power button cable/connector and the motherboard. The other end of the Y-cable extends out of the Mac mini chassis and connects to the "power button extension cable" which connects to J2 on the P1900. This gives you a way to quickly/easily disconnect your Mac if you want to remove it from your car and take it inside! This kit also includes a black momentary pushbutton making your installation even easier. Please note: the button must be soldered on to the end of the y-cable extender.
This cable does not work on mac minis that were made after march of
2009. A cable for the 2009 mac minis is in the works, but we can not commit to a date until it goes into production.
Pushbutton Specs:
Dimensions: 12.5mm x 12.5mm
Contact rating: 20mA
Operating force: 120 ± 50gf
Travel: .7mm
Voltage rating: 50VDC
View a PDF of how to install this product here.
|
|
|
|
|
|
|
|
|
|
|
|
|
DC-Powered 4-Port USB Hub CNX-P5USB (12v and 24v systems)
|
|
Our Price: $85.00
|
|
|
The P5USB can be used in either a +12V or +24V
automotive environment. It will operate down to 7V (survives engine
cranking) and can withstand voltage transients typically found in a
harsh automotive environment.
|
|
|
|
|
|
|
|
|
|
|
|
|
MacPac Power Cable Kit For the NEW Mac Mini
|
|
Our Price: $29.99 Pre-Order: Ship Date December 10th 2009
|
|
|
A "plug and play" power cable kit for your Mac mini! No more cable splicing!!
Carnetix is pleased to announce the only "plug-and-play" power cable solution for the Apple Mac mini and your CarComputer application! The "MacPac" power cable kit connects your mini to the CNX-CA-P1900 or CNX-P2140 DC-DC regulator to provide a quick and simple automotive installation. You are no longer required to cut and splice your Apple AC adapter (brick). The MacPac provides a pre-wired cable between the regulator (P1900 or P2140) and the Mac mini, and includes all power and control signals necessary for full automatic startup and shutdown of the mini. The MacPac is fully compatible with the original Mac mini as well as the new Intel-based mini.
The main white power cable is ~3' from the mac mini power connector. This means your mac mini can be about ~3' from your Carnetix device. Custom cable extensions should be possible to create but will void your warranty.
The power switch portion of this cable kit does not work on mac minis that were made after march of
2009. A cable for the 2009 mac minis is in the works, but we can not commit to a date until it goes into production. Until the new switch cable is made, you can still use this cable to power your mac, it will just not be timed to start up and shut down with your engine ignition status.
NOTE: This Cable package is designed to work with Mac Minis manufactured after March of 2009.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Y Cable Only from the Mac Mini Power Button Cable Kit for the NEW Mac Mini
|
|
Our Price: $7.00 Available in late November
|
|
|
We have designed a Y-cable for the Mac Mini that allow you to keep your existing power button intact! The Y-cable goes in between your existing power button cable/connector and the motherboard. The other end of the Y-cable extends out of the Mac mini chassis and connects to the "power button extension cable" which connects to J2 on the P1900. This gives you a way to quickly/easily disconnect your Mac if you want to remove it from your car and take it inside!
Please Note: This cable will work with Mac Minis manufactured after March of 2009.
View a PDF of how to install this product here.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mac Mini Power Button Cable Kit for the NEW Mac Mini
|
|
Our Price: $10.00 Available in late November
|
|
|
We have designed a Y-cable and extension cable for the Mac mini that allow you to keep your existing power button intact! The Y-cable goes in between your existing power button cable/connector and the motherboard. The other end of the Y-cable extends out of the Mac mini chassis and connects to the "power button extension cable" which connects to J2 on the P1900. This gives you a way to quickly/easily disconnect your Mac if you want to remove it from your car and take it inside!
Please Note: This cable will work with Mac Minis manufactured after March 2009.
View a PDF of how to install this product here.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mac Mini Power Button Cable Kit w/ Momentary Pushbutton for the NEW Mac Mini
|
|
Our Price: $13.99 Available in late November
|
|
|
We have designed a Y-cable and extension cable for the Mac mini that allow you to keep your existing power button intact! The Y-cable goes in between your existing power button cable/connector and the motherboard. The other end of the Y-cable extends out of the Mac mini chassis and connects to the "power button extension cable" which connects to J2 on the P1900. This gives you a way to quickly/easily disconnect your Mac if you want to remove it from your car and take it inside! This kit also includes a black momentary pushbutton making your installation even easier. Please note: the button must be soldered on to the end of the y-cable extender.
Please Note: This cable works with Mac Minis manufactured after March 2009.
Pushbutton Specs:
Dimensions: 12.5mm x 12.5mm
Contact rating: 20mA
Operating force: 120 ± 50gf
Travel: .7mm
Voltage rating: 50VDC
View a PDF of how to install this product here.
|
|
|
|
|
|
|
