http://www.mp3car.com

• H 4.5" x W 7.5"
• Screen Opening H 3.1/8" x W 6.3/32"
• Maximum panel width 6.75"

MKIV Volkswagen 7” Bezel

Technical Specifications

H 4.5” x W 7.5”

Screen Opening H 3.1/8” x W 6.3/32”

Maximum panel width 6.75”

Installation:

Grab your Screwdriver

1. Remove Screen from case, and keep mounting screws and tabs.
   
   
2. Screw Screen tabs into the four corner mounts on the bezel but don’t fully tighten the tabs.

3. Place Screen onto bezel and spin metal tabs over and panel then tighten screws. NOTE: Do not over tighten screws as you may strip screw holes.
   
   
4. Go to your car and remove your stock radio if you have not already done so. (You can get radio keys from 42draftdesigns.com or get ripped of at any VW dealer)
   
   
5. Place the left side of the screen in at an angle as shown below.
   
   
6. Then gently press the right side into the dash and the bezel will snap in.
   
   
7. Congratulations you have installed your MKIV Bezel, Go drive around and play with your Car PC but watch the road!

To remove the bezel:

1. Grab a credit card or other flat object that won’t damage your dash.

2. Stick it in the right side and carefully pry the bezel out, this wont take much force so take it easy.