|
|
|
|
|
|
MacPac Power Cable Kit
|
Ships in 1 to 2 Business Days
Our Price: $29.99
In Stock!
|
|
|
A "plug and play" power cable kit for your Mac mini! No more cable splicing!!
Carnetix is pleased to announce the only "plug-and-play" power cable solution for the Apple Mac mini and your CarComputer application! The "MacPac" power cable kit connects your mini to the CNX-CA-P1900 or CNX-P2140 DC-DC regulator to provide a quick and simple automotive installation. You are no longer required to cut and splice your Apple AC adapter (brick). The MacPac provides a pre-wired cable between the regulator (P1900 or P2140) and the Mac mini, and includes all power and control signals necessary for full automatic startup and shutdown of the mini. The MacPac is fully compatible with the original Mac mini as well as the new Intel-based mini.
The main white power cable is ~3' from the mac mini power connector. This means your mac mini can be about ~3' from your Carnetix device. Custom cable extensions should be possible to create but will void your warranty.
The power switch portion of this cable kit does not work on mac minis that were made after march of
2009. A cable for the 2009 mac minis is in the works, but we can not commit to a date until it goes into production. Until the new switch cable is made, you can still use this cable to power your mac, it will just not be timed to start up and shut down with your engine ignition status.
NOTE: The Power Button cable included in this kit does NOT work with the New Mac Minis (Apple Part No. MB463LL/A). However the main power cable is still compatible. A new Power-button assembly is expected in November.
|
|
|
|
|
|
|
|
|
|
|
|
|
MacPac Power Cable Kit For the NEW Mac Mini
|
Ships in 1 to 2 Business Days
Our Price: $29.99 Pre-Order: Ship Date December 10th 2009
In Stock!
|
|
|
A "plug and play" power cable kit for your Mac mini! No more cable splicing!!
Carnetix is pleased to announce the only "plug-and-play" power cable solution for the Apple Mac mini and your CarComputer application! The "MacPac" power cable kit connects your mini to the CNX-CA-P1900 or CNX-P2140 DC-DC regulator to provide a quick and simple automotive installation. You are no longer required to cut and splice your Apple AC adapter (brick). The MacPac provides a pre-wired cable between the regulator (P1900 or P2140) and the Mac mini, and includes all power and control signals necessary for full automatic startup and shutdown of the mini. The MacPac is fully compatible with the original Mac mini as well as the new Intel-based mini.
The main white power cable is ~3' from the mac mini power connector. This means your mac mini can be about ~3' from your Carnetix device. Custom cable extensions should be possible to create but will void your warranty.
The power switch portion of this cable kit does not work on mac minis that were made after march of
2009. A cable for the 2009 mac minis is in the works, but we can not commit to a date until it goes into production. Until the new switch cable is made, you can still use this cable to power your mac, it will just not be timed to start up and shut down with your engine ignition status.
NOTE: This Cable package is designed to work with Mac Minis manufactured after March of 2009.
|
|
|
|
|
|
|
|
|
|
|
|
|
CarNetix CNX-CA-XSC4
|
Ships in 1 to 2 Business Days
Our Price: $24.99
In Stock!
|
|
|
This power cable kit provides a "plug-and-play" cabling solution for either the P1900 or P2140 and a Xenarc MP-SC3. No soldering is required. The kit includes both the power cable and ACPI cable for the Xenarc MP-SC3 with rear-panel access to the PC power button. Double check your PC to make sure it has this ACPI interface.
|
|
|
|
|
|
|
|
|
|
|
|
|
Aopen Power Pac
|
Ships in 1 to 2 Business Days
Our Price: $24.95
In Stock!
|
|
|
Worried about cutting up your Aopen Pandora Mini-PC power brick to complete your car-pc install? No need. The Aopen Power Cable kit is the first plug-and-play power kit designed to work with the Aopen Pandora Mini-PCs and Carnetix DC-DC regulators (P1900 and P2140).
The kit comes with the power wiring kit as well as the power-button kit. The power wiring kit plugs into a Carnetix P1900 or P2140 regulator and it plugs directly to the power connection on the back of the Pandora Mini-PC giving you a quick way to install the PC in your car. The Power-button kit on the other hand allows you to retain the functionality of the power button on the Aopen case while allowing the Carnetix DC-DC regulator turn the PC on/off with the ignition.
The Aopen Power Cable kit gives you the portability that Mac Mini users have enjoyed for a while. With this kit you won't need to cut your stock power brick, therefore you can port your PC between your house and your car without any wiring hassles.
|
|
|
|
|
|
|
|
|
|
|
|
|
Aopen MiniPC plug-and play Power Button Cable Kit for P1900
|
Ships in 1 to 2 Business Days
Our Price: $14.99
In Stock!
|
|
|
This kit is designed to provide a plug-and-play (ie no soldering) connection to the AOpen power button which can be extended outside of the AOpen chassis and connected to the ACPI output of the P1900. This cable will simplify, and make more reliable the AOpen/P1900 installation.
The cable kit contains two pieces. One piece is inserted between the front panel switch pcb cable and the motherboard. The second piece provides a removable cable section for connecting to the P1900 ACPI output. This allows you to easily remove the AOpen from the car so that you can take it indoors for software updates.
This cable is about 12" long. It can be extended for people who would like more separation between their Aopen and their Carnetix.
|
|
|
|
|
|
|
|
|
|
|
|
|
CarNetix CNX-XSC3 Cable Kit for the Xenarc MP-SC3 Power
|
Ships in 1 to 2 Business Days
Our Price: $14.95
In Stock!
|
|
|
This power cable kit provides a "plug-and-play" cabling solution for either the P1290 and a Xenarc MP-SC3. No soldering is required. The kit includes both the power cable and ACPI cable for the Xenarc MP-SC3 with rear-panel access to the PC power button. Double check your PC to make sure it has this ACPI interface.
For bulk pricing contact store@mp3car.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
CarNetix CNX-XSC8 Cable Kit for the Xenarc MP-SC8 Power
|
Ships in 1 to 2 Business Days
Our Price: $14.95
In Stock!
|
|
|
This power cable kit provides a "plug-and-play" cabling solution for either the P1290 and a Xenarc MP-SC8. No soldering is required. The kit includes both the power cable (4-pin Kycon connector) and ACPI cable (1/8" stereo plug) for the Xenarc MP-SC8 with rear-panel access to the PC power button. Double check your PC to make sure it has this ACPI interface.
For bulk pricing contact store@mp3car.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
DVI Analog Male to VGA Female Adaptor
|
Usually Ships in 1 to 2 Business Days
Our Price: $10.99
In Stock!
|
|
|
This device will convert a DVI-A connection to a VGA monitor cable connection for monitors and computers that require it. DVI-D can not convert to VGA. Only DVI-A can be converted into VGA.
|
|
|
|
|
|
|
|
|
|
|
|
|
Slimline SATA to 7-pin SATA Conversion Cable
|
Usually Ships in 1 to 2 Business Days
Our Price: $10.99
|
|
|
This product utilizes new Slimline SATA technology to convert to a conventional SATA adapter.
|
|
|
|
|
|
|
|
|
|
|
|
|
USB SuperSize Pack
|
Ships in 1 to 2 Business Days
Our Price: $9.99
|
|
|
Add two more USB ports to your computer! Supersize!
Two(2) 6 inch USB A female to motherboard header adapter
One(1)1/2" Gasket/Grommet
|
|
|
|
|
|
|
|
|
|
|
|
|
uSDC Cable Kit
|
Ships in 1 to 2 Business Days
Our Price: $9.99
In Stock!
|
|
|
The uSDC Cable Kit has everything needed to connect a uSDC20D into an automotive application (except heavy gauge wire). The Faston Crimp Connectors can be crimped or soldered to 18-12 gauge wire that is used for connecting the automotive system to the main power lugs (VIN, GND, VOUT), and the accessory lug (ACC). The 24-inch Motherboard cable connects from the uSDC20D to the power switch of your motherboard. The shunt jumpers select optional features. The Optional Feature Cable is good for connecting the Computer On Sense feature, or the Aux connection for your application. uSDC Cable Kit Contents:
2 - 0.1 inch Shunt Jumpers
4 - 0.25 inch Faston Crimp Connectors
1 - 24-inch, 2-pin Motherboard Power Switch Cable, 0.1" connectors on both ends
1 - 10-inch, 2-pin Optional Feature Cable, 0.1" connector on one end
|
|
|
|
|
|
|
|
|
|
|
|
|
Sumicomm/Xenarc/Commell/IWill Case Power Cable
|
Ships in 1 to 2 Business Days
Our Price: $6.95
In Stock!
|
|
|
The optional LCD monitor power cable let's you power your CarPC display from the CNX-P1260 PSU +12 volt output. Just splice this cable in parallel with your CarPC power cable so that the CNX-P1260 powers both units. The connector fits the Lilliput and Xenarc monitors or any other monitor with a 2.1 x 5.5mm power connector.
** IWill ZPC Users Please Note: check your power pins for the proper polarity and pin-outs before using this cable. IWill products have a variation of power pin configurations. Double check before using.***
|
|
|
|
|
|
|
|
|
|
|
|
|
CNX Extra Monitor Power Cable
|
Ships in 1 to 2 Business Days
Our Price: $4.99
In Stock!
|
|
|
The optional LCD monitor power cable let's you power your CarPC display from the CNX-P1900 and P2140 PSU +12 volt output. Just splice this cable in parallel with your CarPC power cable so that the CNX-P1900 or P2140 powers both units. The connector fits the Lilliput and Xenarc monitors or any other monitor with a 2.1 x 5.5mm power connector.
|
|
|
|
|
|
|
|
|
|
|
|
|
Cable Ties 8-1/2" Black 100 Pcs
|
|
Our Price: $4.99
In Stock!
|
|
|
High quality American Cable and wire tie made durable 6/6 UV stabilized black nylon. The lowest insertion force with the highest tensile strength available. 8.8 inch, 223.5mm length. .140 inch, 3.556mm width. .049 inch, 1.244mm thickness. 40lb tensile strength. 1/16"- 2-3/8" bundle diameter. Made in the U.S.A. 100 pieces per sealed bag.
|
|
|
|
|
|
|
|
|
|
|
|
|
4-Pin P4 - Molex Power Cable
|
Ships in 1 to 2 Business Days
Our Price: $3.99
In Stock!
|
|
|
Need a P4 power connection but don't have that ability with your power supply? This is your solution!
|
|
|
|
|
|
|
|
|
|
|
|
|
P4-12V to P4-12V Cable
|
Ships in 1 to 2 Business Days
Our Price: $2.49 Bulk Pricing Available
In Stock!
|
|
|
This 1 foot cable is an accessory for power supplies such as the to the M2-ATX. It provides 12V to P4 systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
ATC 10 gauge FUSE HOLDER W/Cover ATFH10C-10
|
|
Our Price: $0.99
In Stock!
|
|
|
The Install Bay ATC 10 gauge FUSE HOLDER W/Cover
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ATM 16 Gauge Fuse Holder w/Cover ATFH16MC-10
|
Our Price: $7.95
Sale Price: $0.99
You Save $6.96!
In Stock!
|
|
|
The Install Bay ATM 16 Gauge Fuse Holder w/Cover ATFH16MC-10
|
|
|
|
|
|
|
|
|
|
|
|
|
3/16" HEAT SHRINK 3M POLYOLEFIN-50% SHRINK TUBING PER FOOT
|
|
Per Foot $0.85
In Stock!
|
|
|
3/16" HEAT SHRINK 3M POLYOLEFIN-50% SHRINK TUBING PER FOOT
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/4" HEAT SHRINK 3M POLYOLEFIN-50% SHRINK TUBING PER FOOT
|
|
Per Foot $0.85
In Stock!
|
|
|
1/4" HEAT SHRINK 3M POLYOLEFIN-50% SHRINK TUBING PER FOOT
|
|
|
|
|
|
|
|
|
|
|
|
|
12" Red SATA II Cable w/ Locking Latch
|
|
Our Price: $0.75
In Stock!
|
|
|
In the CarPC environment, locking connections are highly beneficial. These locking SATA II cables will help to prevent a cable from coming loose while driving. If your hard drive is no longer connected to your motherboard, your system won't function! Prevent that from happening with these locking SATA II cables.
These Serial ATA cables guarantee you'll be able to plug in your high-performance Serial ATA hard drives, no matter how tight your space is. Latching connectors provide secure connections for SATA hard drives and motherboards that support this feature. With their thin, narrow construction, these flexible cables improve airflow and reduce clutter in your case, helping to keep your case clean and cool.
|
|
|
|
|
|
|
