Black Double Din Nano-ITX Carputer Enclosure 2nd Generation IR Sensor Front USB

$ 55.95

  • Standard double din mounting size
  • Compact user friendly design for easy access and maintenance
  • Fits standard Nano-ITX form factor boards
  • Pico-ITX & SBC Boards installable with standoff
  • Fully ventilated with 40mm cooling fan
  • Internal amplifier can be installed inside (optional)
  • LCD frame can hold 7" Lilliputand Mini-Touch lcd panels
  • Color coded speaker wire harness available (optional)
  • Some double din dash kits may require 3-4 mm trimming to fit the LCD frame


The Second Generation Black Box-N brings a robust solution for the Carputer enthusiasts willing to install their double din in dash infotainment system. Built of high resistance ABS plastic, this fully ventilated rugged enclosure provides secure support to the small from factor boards as well as the 7" LCD touch panels from Lilliput Electronics.

Fully customizable: The ABS plastic material makes it easy to add custom devices by drilling holes and adding adhesive standoffs on the desired positions. Its removable cut out window exposes fixed board ports



Recommended hardware

Motherboard

  • Via Epia NX15000G
  • Via Epia N1200EG
  • Portwell Nano-8044 series board
  • Contron SBC (Single Board Computer)
  • Via Pico-ITX boards
Power Supply
Memory
  • 1GB DDR2 533 SODIMM
LCD Screen
Storage

The Benefits of ABS

ABS possesses outstanding impact strength and high mechanical strength, which makes it so suitable for tough consumer products. Additionally, ABS has good dimensional stability and electrical insulating properties. ABS plastic is versatile, lightweight, flexible, moisture and corrosion resistant, durable, strong, heat resistant and relatively inexpensive. It is also fully recyclable.

Material

ABS plastic

Box dimensions:

177mm(W)

100mm(H)

177mm (D)

Frame dimensions:

177mm(W)x107mm(H)

Weight:

1.25 Lb

Operation temperature:

-20o C to 70o C

Power:

Needs 12V DC psu

Display:

Can be used with 7"

Lilliput EBY701 or 629GL

Form factor:

Nano-ITX or smaller

Power supply:

M3 ATX PSU recommended

Audio:

2x 3.5mm jack to board audio header adapter

1x 2.5mm optional

Cooling fan:

40x40x10mm ball bearing

Silent 5,000 rpm

12VDC, 3 pin connector

Noise Level:

<21 dBA

Power wiring:

6 contact 20WGA color coded power harness

Audio wiring:

8 contact 20WGA color coded speakers harness optional

Other:

Molex to 5V DC adapter

Package contents:
1

Black Box

1

40mm cooling fan with 3 pin connector

1

"H" bracket to support LCD controller board

1

Mini-USB breakout board with cables and usb header connector

1

IR sensor with 6" extender cable

1

Molex to 5V power jack adapter

1

6 pin power harness with 2.5mm power plug

2

3.5mm Audio jack with wires and crimp connectors (assembled)

1

3.5mm Audio jack with wires and crimp connectors (not assembled)

1

14 pin 2.0 pitch header socket for audio port

14

4x1/4 pan head screws

4

4x1/4 pan head screws to support controller board

6

2x1/4 pan head screws for graphics ctrl. board

4

4-40 X 3/16 machine screws for hard drive


DOWNLOAD FULL SPECS BROCHURE

2.7 Mb PDF

DOWNLOAD ASSEMBLY GUIDE

9.2 Mb PDF Ver. 1.1 (10/09/09))

DOWNLOAD AUDIO PORT SCHEMATICS

< 1 Mb PDF

DOWNLOAD LILLIPUT VGA PIN OUT

< 1 Mb PDF

DOWNLOAD FILTER NOISE CHOKE DIAGRAMS

< 1 Mb PDF

DOWNLOAD AMPLIFIER INSTALLATION GUIDE

<1 Mb