- ATmega32U4 microcontroller and Atheros AR9331 (Linux part)
- WiFi IEEE 802.11b/g/n and Ethernet IEEE 802.3 10/100Mbit/s
- MicroUSB Connector
The Arduino Yún is a microcontroller board based on the ATmega32u4 (datasheet) and the Atheros AR9331. The Atheros processor supports a Linux distribution based on OpenWRT named Linino. The board has built-in Ethernet and WiFisupport, a USB-A port, micro-SD card slot, 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a 3 reset buttons.
The Yún distinguishes itself from other Arduino boards in that it can communicate with the Linux distribution onboard, offering a powerful networked computer with the ease of Arduino. In addition to Linux commands like cURL, you can write your own shell and python scripts for robust interactions.
The Yún is similar to the Leonardo in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Yún to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.
The Bridge library facilitates communication between the two processors, giving Arduino sketches the ability to run shell scripts, communicate with network interfaces, and receive information from the AR9331 processor. The USB host, network interfaces and SD card are not connected to the 32U4, but the AR9331, and the Bridge library also enables the Arduino to interface with those peripherals.
Because the Yún has two processors, the summary section shows the characteristics of each one in two separate tables.
AVR Arduino microcontroller
Digital I/O Pins20
Analog Input Channels12
DC Current per I/O Pin40 mA
DC Current for 3.3V Pin50 mA
Flash Memory32 KB (of which 4 KB used by bootloader)
Clock Speed16 MHz
EthernetIEEE 802.3 10/100Mbit/s
USB Type-A2.0 Host/Device
Card ReaderMicro-SD only
RAM64 MB DDR2
Flash Memory16 MB
PoE compatible 802.3af card support